CAR HAULERS/RACE TRAILERS
Limited – Car Hauler
The United Limited Race Trailer is designed to provide dependable performance and durability for racers who need a reliable, race-ready hauler. Featuring a .030 screwless aluminum exterior and a one-piece aluminum roof, this trailer delivers a clean, professional look with long-lasting protection. With an 8.5-foot width and an approximate 7-foot interior height, it offers ample space for your race car and equipment. A ramp door with beavertail and a standard 32″ x 72″ RV side door provide easy loading and convenient access.
Inside, the trailer is built for functionality with 3/8-inch plywood walls, a white vinyl ceiling, and a durable 3/4-inch plywood floor. The structure is reinforced with 16-inch on-center floor, wall, and roof framing and a double I-beam main frame, ensuring strength and stability under demanding conditions. Dexter torsion axles and 16-inch aluminum wheels provide a smooth, reliable ride, while the rear wing adds a sleek, race-inspired appearance.
The trailer comes equipped with (4) bolt-in D-rings, a spare tire compartment, winch plate, and recessed battery box for added convenience. Electrical features include (4) Voodoo LED lights on a single switch, LED tail and clearance lights, and essential wiring for track-ready use. A 30-amp panel box with motor base plug, 12v converter with receptacle, battery switch, and (2) 110v receptacles provide the power needed at the track.
Available in 8.5 x 20, 24, and 28-foot lengths, the United Limited Race Trailer combines quality construction, essential features, and race-focused design—making it a practical and dependable choice for safely transporting your vehicle and equipment.
Colors






SIZES AVAILABLE
- Tandem Axle: 8.5×20, 24, 28ft
STANDARD FEATURES
INTERIOR HEIGHT
- Approximate 7ft. Interior Height
AXLE & WHEELS
- Dexter Torsion Axles
- 10″ Spread Axles on 20ft
- Super Spread Axles on 24ft & 28ft
- 16″ Black & Silver Aluminum Wheels
HITCH
- 2-5/16″ Coupler
- Top-Wind Jack w/ Foot Pad
- 7-Way Plug
FRAME
- 16″ O.C. Walls, Floor, and Roof
- Winch Plate
- Double I-Beam Main Frame
- 2″ Rear Corner Posts
- Spare Tire Well
- Recessed Battery Box
INTERIOR
- 3/8″ Plywood Walls w/ White Vinyl Coating
- 3/4″ Plywood Floor
- White Vinyl Ceiling
- (4) Bolt-In D-Rings
EXTERIOR
- .030 Taped Exterior
- ATP Stoneguard
- Black or Mill Finish Body Trim
- One-Piece Aluminum Roof
- Non-Power Roof Vent (Braced and Wired for Future A/C)
- Rear Wing
ELECTRICAL
- LED Tail Lights and Clearance Lights
- 12v Converter with Recept
- (2) 110v Interior Duplex Recepts
- 30-amp Panel Box with 30-amp Motor Base Plug
- 12v Switch w/ battery
DOORS
- Ramp Door w/ Beavertail
- 32″ x 72″ 400 Series RV Side Door
- Aluminum Door Hold Backs
- Aluminum Grab Handles on Ramp Door
- Frame-Out for Future Jump Door (48″ x 58″)
